Impressive Plastic Cups Snowman

Snowmen are usually made ​​of, well, snow! But what if you do not want to get cold and wet, make a plastic cups snowman. It takes a lot of time and resources (700 + cup), but it will be a semi-permanent feature in your home, as it will not melt like those other snowmen. Also, see how it looks impressive.


What you'll need:

1. Plastic cups (about 700 or more depending on how big you want your snowman)
2. Stapler and staples
3. Tape
4. Accessories to dress up your snowman



1. Start with five cups upside down. Take five pieces of tape and attach the cup in pairs. Cups do not need to be perfectly vertical.

2. Take a stapler and staple together two cups and repeat until all the cups were not sewn together.

3. Start adding the cup from the outside other and stitching them together. Do you want to add slanted because it will allow him to get more and then eventually less. As you work your way up, it will form into a ball.


4. Take 24 cups and arrange them on your side. Tape them together so they will not fall apart, then staple them.

5. Start layers cups. Cups naturally tilting and ultimately the ball will be formed.

6. Place this second portion at the upper portion of the first then add accessories.

Congratulations! You've just made ​​your own plastic cup snowman.

Grow Your Plants in Plastic Bottles

Use plastic bottles of  five gallons and cultivate what you want. It is ideal for those who lives in an apartment and can not afford to have their own garden.

Make a Bird-House with Plastic Bottles - Great Creative Idea

It is very simple and easy to make a birdhouse with plastic bottles. The bottom is H2O with a cut to the little door surmounted with shoelaces and the roof is 2 liters of plastice coke bottle with a tope of raffia and button heart. In painting use a hand primer and two hands acrylic paint. You can also paint a few sprigs of flowers, more acrylic varnish. The glue uses contact to glue the roof at the bottom of the Birdhouse and lace on the door.

To be able to hang, made ​​two holes, one on each side, just below the cap ex bottle, with a crochet needle old at the blunt, heated in the fire (careful not to burn yourself). Drew the cover and passed through the holes in the other piece of lace so that we stay inside the crate, then cover and replace it.

Use a Simple Coke Plastic Bottle to Make an Original Box for Gifts

After a birthday party of things to recycle there are several, among them invariably a few bottles of Coca Cola. Here are some of the photos taken by during processing that follow that idea.

The bottle of Coca Cola has 10 channels, through making 5 cuts of about 5.5 cm along the grooves themselves, cutting a groove and is a no. Round off the edges, in the pictures I've highlighted with a marker lines to follow but it is only to make you understand better, the pen really should not be used because it would then removed.

   Fold down the 'fins' and you're done! Filled with what you want and finished with a ribbon.

The red Christmas ball that you see behind was filled by recycling an old wire Christmas tree while the blue one I used chips made from a water.